Can somebody please help me??

[Jimmydean55]

I'm trying to get a movie to my ipod. I used dvd dycrypter using the steps shown here: http://forums.afterdawn.com/thread_view.cfm/244629

Thwe problem I'm haviong is when i open up videora and start my conversion, it goes to 100% in about 2 seconds, yet keeps on working.

I enabled the console, started the conversion and aborted in less than 10 seconds. Can somebody help me???
MSG - MediaInfo - Framerate: 29.97 fps
MSG - Converter - Automatically Resizing Resolution
MSG - Converter - New Width:320 | New Height: 180
MSG - Converter - Out of Order Execution Detected
MSG - Converter - Automatically Generating Framerate
EXEC: C:\Program Files\Red Kawa\Video Converter\Tools\FFmpeg\ffmpeg.exe -y -i "C:\Documents and Settings\Owner\My Documents\My Videos\Anchorman.VOB" -f mp4 -title "Anchorman" -timestamp "2007-04-21 01:49:26" -vcodec h264 -level 13 -s 320x180 -r 30000/1001 -b 768k -bt 768k -bufsize 2000k -maxrate 768k -g 250 -coder 0 -acodec aac -ac 2 -ab 128k "C:\Documents and Settings\Owner\My Documents\Converted Videos\iPod\H264\Anchorman.mp4"

FFmpeg version SVN-r8731, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: --enable-gpl --enable-pp --enable-swscaler --enable-pthreads --enable-liba52 --enable-avisynth --enable-libdts --enable-libfaac --enable-libfaad --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libogg --enable-libtheora --enable-libvorbis --enable-x264 --enable-xvid --enable-amr_nb --enable-amr_wb --cpu=i686 --enable-memalign-hack --extra-ldflags=-static
libavutil version: 49.4.0
libavcodec version: 51.40.3
libavformat version: 51.12.1
built on Apr 15 2007 00:37:23, gcc: 4.3.0 20070330 (experimental)

Seems stream 0 codec frame rate differs from container frame rate: 29.97 (30000/1001) -> 59.94 (60000/1001)
Input #0, mpeg, from 'C:\Documents and Settings\Owner\My Documents\My Videos\Anchorman.VOB':
Duration: N/A, start: 0.280633, bitrate: N/A
Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x480, 9800 kb/s, 59.94 fps(r)
Stream #0.1[0x80]: Audio: ac3, 48000 Hz, 5:1, 448 kb/s
Output #0, mp4, to 'C:\Documents and Settings\Owner\My Documents\Converted Videos\iPod\H264\Anchorman.mp4':
Stream #0.0: Video: h264, yuv420p, 320x180, q=2-31, 768 kb/s, 29.97 fps(c)
Stream #0.1: Audio: aac, 48000 Hz, stereo, 128 kb/s
Stream mapping:
Stream #0.0 -> #0.0
Stream #0.1 -> #0.1
[h264 @ 009BC940]width or height not divisible by 16 (320x180), compression will suffer.
[h264 @ 009BC940]using SAR=1/1
[h264 @ 009BC940]using cpu capabilities MMX MMXEXT SSE SSE2 3DNow!
No accelerated IMDCT transform found
Press [q] to stop encoding
[h264 @ 009BC940]OVERFLOW levelcode=4407

[Midiman]

It doesn't look like a complete log. I'd like to see the stuff that was omitted at the beginning. I'll venture a guess and say you might be having problems with the audio in the VOB file.

[msopnet]

Your console says: "Duration: N/A"

It just couldn't automatically find how long the video is; it will convert, it'll just say 100% the whole time.

[Jimmydean55]

I copied all of what was in there this time :)



EXEC: C:\Program Files\Red Kawa\Video Converter\Tools\MediaInfo\mediainfobatch.bat "C:\Program Files\Red Kawa\Video Converter\Tools\MediaInfo\MediaInfo.exe" "C:\Program Files\Red Kawa\Video Converter\Tools\MediaInfo\parameters.txt" "C:\Documents and Settings\Owner\My Documents\My Videos\Anchorman.VOB"

PlayTime=00:00:02.500

Width=720

Height=480

AspectRatio=1.778

FrameRate=29.970
MediaInfo Command line, MediaInfoLib - v0.7.4.5
MSG - OS - Version: Microsoft Windows NT 5.1.2600 Service Pack 2
MSG - Converter - Version: 2.19
MSG - Converter - Profile: H.264 QVGA 768kbps Stereo/128kbps
MSG - MediaInfo - Length: 2s
MSG - MediaInfo - Width: 720 pixels
MSG - MediaInfo - Height: 480 pixels
MSG - MediaInfo - Aspect Ratio: 1.778
MSG - MediaInfo - Framerate: 29.97 fps
MSG - Converter - Automatically Resizing Resolution
MSG - Converter - New Width:320 | New Height: 180
MSG - Converter - Out of Order Execution Detected
MSG - Converter - Automatically Generating Framerate
EXEC: C:\Program Files\Red Kawa\Video Converter\Tools\FFmpeg\ffmpeg.exe -y -i "C:\Documents and Settings\Owner\My Documents\My Videos\Anchorman.VOB" -f mp4 -title "Anchorman" -timestamp "2007-04-21 02:15:59" -vcodec h264 -level 13 -s 320x180 -r 30000/1001 -b 768k -bt 768k -bufsize 2000k -maxrate 768k -g 250 -coder 0 -acodec aac -ac 2 -ab 128k "C:\Documents and Settings\Owner\My Documents\Converted Videos\iPod\H264\Anchorman.mp4"

FFmpeg version SVN-r8731, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: --enable-gpl --enable-pp --enable-swscaler --enable-pthreads --enable-liba52 --enable-avisynth --enable-libdts --enable-libfaac --enable-libfaad --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libogg --enable-libtheora --enable-libvorbis --enable-x264 --enable-xvid --enable-amr_nb --enable-amr_wb --cpu=i686 --enable-memalign-hack --extra-ldflags=-static
libavutil version: 49.4.0
libavcodec version: 51.40.3
libavformat version: 51.12.1
built on Apr 15 2007 00:37:23, gcc: 4.3.0 20070330 (experimental)

Seems stream 0 codec frame rate differs from container frame rate: 29.97 (30000/1001) -> 59.94 (60000/1001)
Input #0, mpeg, from 'C:\Documents and Settings\Owner\My Documents\My Videos\Anchorman.VOB':
Duration: N/A, start: 0.280633, bitrate: N/A
Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x480, 9800 kb/s, 59.94 fps(r)
Stream #0.1[0x80]: Audio: ac3, 48000 Hz, 5:1, 448 kb/s
Output #0, mp4, to 'C:\Documents and Settings\Owner\My Documents\Converted Videos\iPod\H264\Anchorman.mp4':
Stream #0.0: Video: h264, yuv420p, 320x180, q=2-31, 768 kb/s, 29.97 fps(c)
Stream #0.1: Audio: aac, 48000 Hz, stereo, 128 kb/s
Stream mapping:
Stream #0.0 -> #0.0
Stream #0.1 -> #0.1
[h264 @ 009BC940]width or height not divisible by 16 (320x180), compression will suffer.
[h264 @ 009BC940]using SAR=1/1
[h264 @ 009BC940]using cpu capabilities MMX MMXEXT SSE SSE2 3DNow!
No accelerated IMDCT transform found
Press [q] to stop encoding
[h264 @ 009BC940]OVERFLOW levelcode=4407
frame= 71 fps= 0 q=2.0 size= 2kB time=1.7 bitrate= 8.9kbits/s
frame= 119 fps= 0 q=2.0 size= 57kB time=3.9 bitrate= 121.5kbits/s
frame= 148 fps= 99 q=18.0 size= 360kB time=4.7 bitrate= 627.9kbits/s
frame= 179 fps= 90 q=14.0 size= 426kB time=5.7 bitrate= 611.0kbits/s
frame= 209 fps= 84 q=23.0 size= 547kB time=6.7 bitrate= 667.2kbits/s
frame= 238 fps= 79 q=17.0 size= 654kB time=7.7 bitrate= 697.4kbits/s
frame= 266 fps= 76 q=16.0 size= 770kB time=8.7 bitrate= 728.7kbits/s
frame= 295 fps= 74 q=14.0 size= 882kB time=9.7 bitrate= 747.5kbits/s
frame= 325 fps= 72 q=15.0 size= 987kB time=10.6 bitrate= 761.2kbits/s
frame= 355 fps= 71 q=13.0 size= 1088kB time=11.6 bitrate= 769.4kbits/s
frame= 385 fps= 70 q=13.0 size= 1194kB time=12.6 bitrate= 775.8kbits/s
frame= 414 fps= 69 q=13.0 size= 1293kB time=13.5 bitrate= 784.6kbits/s
frame= 443 fps= 68 q=15.0 size= 1397kB time=14.5 bitrate= 790.3kbits/s
frame= 471 fps= 67 q=14.0 size= 1502kB time=15.4 bitrate= 797.5kbits/s
frame= 499 fps= 66 q=13.0 size= 1600kB time=16.4 bitrate= 799.8kbits/s
frame= 528 fps= 66 q=16.0 size= 1698kB time=17.3 bitrate= 804.1kbits/s
frame= 553 fps= 65 q=19.0 size= 1804kB time=18.2 bitrate= 813.1kbits/s
frame= 576 fps= 64 q=13.0 size= 1887kB time=19.0 bitrate= 815.0kbits/s
frame= 604 fps= 63 q=17.0 size= 1991kB time=19.9 bitrate= 818.4kbits/s
DELETE: C:\Documents and Settings\Owner\My Documents\Converted Videos\iPod\H264\Anchorman.mp4

[Jimmydean55]

Your console says: "Duration: N/A"

It just couldn't automatically find how long the video is; it will convert, it'll just say 100% the whole time.

How will I know when it's done then? Haha.

[Midiman]

Input #0, mpeg, from 'C:\Documents and Settings\Owner\My Documents\My Videos\Anchorman.VOB':
Duration: N/A, start: 0.280633, bitrate: N/A
Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x480, 9800 kb/s, 59.94 fps(r)
Stream #0.1[0x80]: Audio: ac3, 48000 Hz, 5:1, 448 kb/s

I'm used to seeing something more along the line of:

Audio: ac3, 48000 Hz, stereo, 448 kb/s

[Jimmydean55]

Well. I waited for it to get done and then I got the error message that everyone else seems to be getting 'Could not place in itunes". I read the other thread and did it manually and everything is great! Thanks for the info!

Now.....how do i get that damn widescreen to full???? haha...