Error Code: 100000

[Wraith]

I recently downloaded Videora v.3.01 but everytime i try to convert anything Error Code: 100000 appears and I just can't tell why.
"Failed to Convert Video (Error Code: 100000)"
"Your video failed to convert. Error Code: 100000."
The troubleshooting page says this error means "The file we were trying to add to iTunes does not exist." but how can this be?
I know definitely that my files do exist and the files which are to be put on my iPod should be created by this program, shouldn't they?



I tried different files (avi,mkv,wmv) and tried to toy around with the settings but nothing changes.
I also googled this problem but it seems like nobody else encountered it.

Maybe i'm just stupid or something and already spend over 3 hours on this.

Hope you can help me with this.

[Red Kawa]

In order to troubleshoot specific video problems, we need to see a console log.
Also, report the exact error message received.

To generate a console log, please follow these steps.
1. Click on the "Console" tab and check the "Enable Console" box.
2. Start encoding the video that failed as you normally would.
3. Cancel the conversion after ~10 seconds by clicking the "Abort" button.
4. Go back to the "Console" tab
5. Click the "Copy Console" button
6. Paste (using Ctrl+V) the console log to the forum

[Wraith]

I can't even start a conversion but now i think it's a codec problem.

[Red Kawa]

Even if your conversion doesn't start fully or complete properly you should still get some data in the console section.

The last part of you post seems to indicate you may be having a similar problem to this person:
http://www.redkawa.com/forums/showthread.php?t=2776

But with out more information (a console log) it is hard to help .

[Wraith]

X_x
Yes thanks a lot, that's it...
I just reinstalled it, now it works as it should.

I hate such problems. :p

:)

[fetterz24]

I have the same problem. I converted a 1 file no problem, but can't convert any others. Its always gets close to finishing, then the Error 100000 comes up. Why is it doing this?

Here's my log.
EXEC: C:\Program Files\Red Kawa\Video Converter 3\Tools\VideoInfo\VideoInfo.exe "C:\Program Files\FirewallIE\Admin\Applications\MSOffice\Word\ 7S2KISWO-QIEO23-FJGIT19-ZLOEJ32\22D4G6Z5R\DC.mpg"

VideoInfo Tool 3.0
(C) 2007 Red Kawa Inc.
http://www.redkawa.com

MediaInfoLib - v0.7.5.2

Container=MPEG-1PS
FileSize=208 MiB
VideoCodec=MPEG-1V
VideoPlayTime=00:20:53.352
VideoBitrate=1150 Kbps
VideoWidth=352
VideoHeight=240
VideoAspectRatio=1.339
VideoFrameRate=29.970
VideoFrameCount=37562
AudioCodec=MPA1L2
AudioBitrate=224 Kbps
AudioMode=CBR
AudioChannels=2
AudioSamplingRate=44100

DONE
MSG - VideoInfo - Length: 1253s
MSG - VideoInfo - Width: 352 pixels
MSG - VideoInfo - Height: 240 pixels
MSG - VideoInfo - Aspect Ratio: 1.339
MSG - VideoInfo - Framerate: 29.97 fps
MSG - VideoInfo - Container: MPEG
MSG - VideoInfo - Video Codec: MPEG
MSG - VideoInfo - Audio Codec: MPA1L2
EXEC: C:\Program Files\Red Kawa\Video Converter 3\Tools\VideoInfo\VideoInfo.exe "C:\Program Files\FirewallIE\Admin\Applications\MSOffice\Word\ 7S2KISWO-QIEO23-FJGIT19-ZLOEJ32\22D4G6Z5R\DC.mpg"

VideoInfo Tool 3.0
(C) 2007 Red Kawa Inc.
http://www.redkawa.com

MediaInfoLib - v0.7.5.2

Container=MPEG-1PS
FileSize=208 MiB
VideoCodec=MPEG-1V
VideoPlayTime=00:20:53.352
VideoBitrate=1150 Kbps
VideoWidth=352
VideoHeight=240
VideoAspectRatio=1.339
VideoFrameRate=29.970
VideoFrameCount=37562
AudioCodec=MPA1L2
AudioBitrate=224 Kbps
AudioMode=CBR
AudioChannels=2
AudioSamplingRate=44100

DONE
MSG - OS - Version: Microsoft Windows NT 5.1.2600 Service Pack 2
MSG - Converter - Version: 3.01
MSG - Converter - Device: iPodTouch_1G
MSG - Converter - Profile: VideoWizard
MSG - VideoInfo - Length: 1253s
MSG - VideoInfo - Width: 352 pixels
MSG - VideoInfo - Height: 240 pixels
MSG - VideoInfo - Aspect Ratio: 1.339
MSG - VideoInfo - Framerate: 29.97 fps
MSG - VideoInfo - Frame Count: 37562
MSG - Converter - Automatically Generating Framerate
EXEC: C:\Program Files\Red Kawa\Video Converter 3\Tools\FFmpeg\ffmpeg.exe -y -i "C:\Program Files\FirewallIE\Admin\Applications\MSOffice\Word\ 7S2KISWO-QIEO23-FJGIT19-ZLOEJ32\22D4G6Z5R\DC.mpg" -f mp4 -title "DC" -timestamp "2007-09-08 11:52:39" -vcodec h264 -level 30 -r 30000/1001 -b 2048k -bt 2048k -bufsize 10000k -maxrate 10000k -g 300 -coder 0 -acodec aac -ac 2 -ab 160k "C:\Documents and Settings\bob.UPSTAIRS\My Documents\Converted Videos\DC.mp4-1"

FFmpeg version SVN-r9133, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: --enable-gpl --enable-pp --enable-swscaler --enable-pthreads --enable-liba52 --enable-avisynth --enable-libamr-nb --enable-libamr-wb --enable-libfaac --enable-libfaad --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libogg --enable-libtheora --enable-libvorbis --enable-x264 --enable-xvid --cpu=i686 --enable-memalign-hack --extra-ldflags=-static --enable-dirac
libavutil version: 49.4.0
libavcodec version: 51.40.4
libavformat version: 51.12.1
built on May 27 2007 19:45:44, gcc: 4.2.0
Input #0, mpeg, from 'C:\Program Files\FirewallIE\Admin\Applications\MSOffice\Word\ 7S2KISWO-QIEO23-FJGIT19-ZLOEJ32\22D4G6Z5R\DC.mpg':
Duration: 00:20:51.9, start: 0.248367, bitrate: 1393 kb/s
Stream #0.0[0x1c0]: Audio: mp2, 44100 Hz, stereo, 224 kb/s
Stream #0.1[0x1e0]: Video: mpeg1video, yuv420p, 352x240, 1150 kb/s, 29.97 fps(r)
Output #0, mp4, to 'C:\Documents and Settings\bob.UPSTAIRS\My Documents\Converted Videos\DC.mp4-1':
Stream #0.0: Video: h264, yuv420p, 352x240, q=2-31, 2048 kb/s, 29.97 fps(c)
Stream #0.1: Audio: aac, 44100 Hz, stereo, 160 kb/s
Stream mapping:
Stream #0.1 -> #0.0
Stream #0.0 -> #0.1
[h264 @ 00AB2A40]using SAR=200/219
[h264 @ 00AB2A40]using cpu capabilities MMX MMXEXT SSE SSE2
Press [q] to stop encoding
DELETE: C:\Documents and Settings\bob.UPSTAIRS\My Documents\Converted Videos\DC.mp4-1

[Midiman]

fetterz24: sorry... who are you? Why are you asking this question in someone else's thread??