PDA

View Full Version : My audio is screwed up!


drummerboy99
09-10-2007, 08:54 PM
I tried converting a video for the first time, and when it was done, the audio was about 3 times faster than the video. The video was perfectly fiine, just the audio. I tried playing the original file from when I ripped it, and it's perfectly fine, it's just when I converted it, something happened. Please help me...

Here is my log.....



EXEC: C:\Program Files\Red Kawa\Video Converter 3\Tools\VideoInfo\VideoInfo.exe "C:\Documents and Settings\Owner\Desktop\Christian\New Folder\VTS_01_1.VOB"

VideoInfo Tool 3.0
(C) 2007 Red Kawa Inc.
http://www.redkawa.com

MediaInfoLib - v0.7.5.2

Container=MPEG-2PS
FileSize=3.80 GiB
VideoCodec=MPEG-2V
VideoPlayTime=00:45:48.128
VideoBitrate=7500 Kbps
VideoWidth=720
VideoHeight=480
VideoAspectRatio=1.778
VideoFrameRate=29.970
VideoFrameCount=82361
AudioCodec=AC3
AudioBitrate=192 Kbps
AudioMode=CBR
AudioChannels=2
AudioSamplingRate=48000

DONE
MSG - OS - Version: Microsoft Windows NT 5.1.2600 Service Pack 2
MSG - Converter - Version: 3.01
MSG - Converter - Device: iPod_5G
MSG - Converter - Profile: H.264 QVGA 768kbps Stereo/128kbps
MSG - VideoInfo - Length: 2748s
MSG - VideoInfo - Width: 720 pixels
MSG - VideoInfo - Height: 480 pixels
MSG - VideoInfo - Aspect Ratio: 1.778
MSG - VideoInfo - Framerate: 29.97 fps
MSG - VideoInfo - Frame Count: 82361
MSG - Converter - Automatically Resizing Resolution
MSG - Converter - New Width:320 | New Height: 180
MSG - Converter - Automatically Generating Framerate
EXEC: C:\Program Files\Red Kawa\Video Converter 3\Tools\FFmpeg\ffmpeg.exe -y -i "C:\Documents and Settings\Owner\Desktop\Christian\New Folder\VTS_01_1.VOB" -f mp4 -title "VTS_01_1" -timestamp "2007-09-10 06:41:06" -vcodec h264 -level 13 -s 320x180 -r 30000/1001 -b 768k -bt 768k -bufsize 2000k -maxrate 768k -g 250 -coder 0 -acodec aac -ac 2 -ab 128k "C:\Program Files\iTunes\VTS_01_1.mp4"

FFmpeg version SVN-r9133, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: --enable-gpl --enable-pp --enable-swscaler --enable-pthreads --enable-liba52 --enable-avisynth --enable-libamr-nb --enable-libamr-wb --enable-libfaac --enable-libfaad --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libogg --enable-libtheora --enable-libvorbis --enable-x264 --enable-xvid --cpu=i686 --enable-memalign-hack --extra-ldflags=-static --enable-dirac
libavutil version: 49.4.0
libavcodec version: 51.40.4
libavformat version: 51.12.1
built on May 27 2007 19:45:44, gcc: 4.2.0

Seems stream 0 codec frame rate differs from container frame rate: 29.97 (30000/1001) -> 59.94 (60000/1001)
Input #0, mpeg, from 'C:\Documents and Settings\Owner\Desktop\Christian\New Folder\VTS_01_1.VOB':
Duration: 00:45:45.7, start: 0.045556, bitrate: 11883 kb/s
Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x480, 7500 kb/s, 59.94 fps(r)
Stream #0.1[0x80]: Audio: ac3, 48000 Hz, mono, 192 kb/s
Output #0, mp4, to 'C:\Program Files\iTunes\VTS_01_1.mp4':
Stream #0.0: Video: h264, yuv420p, 320x180, q=2-31, 768 kb/s, 29.97 fps(c)
Stream #0.1: Audio: aac, 48000 Hz, stereo, 128 kb/s
Stream mapping:
Stream #0.0 -> #0.0
Stream #0.1 -> #0.1
[h264 @ 00AB2A40]width or height not divisible by 16 (320x180), compression will suffer.
[h264 @ 00AB2A40]using SAR=1/1
[h264 @ 00AB2A40]using cpu capabilities MMX MMXEXT SSE 3DNow!
No accelerated IMDCT transform found
Press [q] to stop encoding
[ac3 @ 00AB2A40]ac3dec: AC3 Source channels are less than specified: output to 1 channels.. (frmsize: 768)
[h264 @ 00AB2A40]OVERFLOW levelcode=4407

Midiman
09-10-2007, 09:26 PM
You need to change the audio output setting of that profile to mono so it matches your source.

drummerboy99
09-11-2007, 11:40 PM
Ummm... I'm sorry, but you're going to have to help me on this one. You can probably tell I don't know too much about this stuff. If you can tell me exactly how to do so, that would be wonderful. :confused:

Midiman
09-12-2007, 01:08 AM
I haven't had time to rewrite these since 3.x came out but it should get you in the ballpark.

HOW TO CHANGE AUDIO SETTINGS:

Go to settings
In the Encoding Profiles section, select the profile you want to use/edit
Click the Edit Profile button
In the Edit Profile window click the Audio tab
Change what you need
Click OK to close the Edit Profile window
Click the Convert tab on the main Videora window
Select the video you want to convert
Select the profile you just edited
Convert